KUHN GMD16 - 5.3 Required equipment; 5.3.1 PTO shaft

5. - Machine specifications
GMD16-GMD20
37
KN225BGB_A
Disc mower
5.3 Required equipment
The machine is factory fitted with the following
equipment:
5.3.1 PTO shaft:
 1 3/8’’ - 6 spline pto shaft
A specific pto shaft is available as option for tractors
equipped with a 1 3/8’’ - 6 spline pto stub.
or

1 3/8’’ - 6 spline pto shaft (With free wheel
clutch)
This pto-shaft with free wheel avoids shocks
generated by the inertia of the rotating components
during deceleration or stopping of the tractor
engine.
or

32 x 38 - 8 spline pto shaft
A specific pto shaft is available as option for tractors
equipped with a 32 x 38 - 8 spline pto stub.