KUHN GMD16 - 6.2 Coupling and uncoupling; 6.2.1 Description of coupling elements; 6.2.2 Preparing the tractor

6. - Putting into service
GMD16-GMD20
41
KN225BGB_A
Disc mower
6.2 Coupling and uncoupling
The machine adapts to tractors fitted with a
standardized 3-point hitch category 1 and 2.
6.2.1 Description of coupling elements
• A PTO shaft 1 3/8’’ - 6 splines (1).
• A release cord (2).
• A check chain (3).
6.2.2 Preparing the tractor
- Select the tractor speed of 540/min.
3
1
2
Check that the tractor's authorized gross
weight as well as its lift capacity and
maximum weight per axle are not exceeded.
See section:
- Safety / Safety instructions /
Precautions when driving on public
roads.
- Appendix.
The tractor must be fitted with lower link
stabilizers.
M1
abcd
T
1
T2
M2