KUHN GMD16 - 10.3 Maintenance; 10.3.1 Belt tension

10. - Maintenance and storage
GMD16-GMD20
73
KN225BGB_A
Disc mower
10.3 Maintenance
10.3.1 Belt tension
Adjusting the tension:
- Unscrew the 2 nuts (1).
- Tighten nut (2).
- Tighten the 2 nuts (1).
Before carrying out any maintenance or
repairs on the machine, switch off the tractor
engine, remove ignition key, wait until all
moving parts have come to a standstill and
apply park brake.
Regularly check belt tension and in particular
during the first hours of use.
Never replace belts individually.
Replace belts in full sets.
1
1
2