KUHN GMD16 - 10.2 Lubrication; 10.2.1 PTO shafts

10. - Maintenance and storage
GMD16-GMD20
67
KN225BGB_A
Disc mower
10.2 Lubrication
The pictorials show the points to be greased.
- Clean grease nipples before greasing.
Lubricate with multi-purpose grease grade
NLGI 2.
10.2.1 PTO shafts
 Primary PTO shaft
Place the machine in working position.
Stop the tractor engine and remove ignition
key.
Before using the machine for the first time:
- Grease the transmission.
Configuration: Standard
Every 50 hours:
• (1): Cross-bars.
• (2): Guide rings.
• (3): Transmission tube.
1 1
2 2
3