GMD16-GMD20
80
10. - Maintenance and storage
KN225BGB_A
Disc mower
Knives can be turned over on the same disc to use
the other cutting edge or replaced. On each knife,
an arrow indicates the disc's direction of rotation.
- Make sure that the securing nut and bolt are in
good condition and if necessary, replace them.
- Tighten the securing nut of the knives to 12 daN.m
(89 lbf ft).
Dull knives require more horse power and have a
negative effect on the cut quality.
Knife attachment per bolt and nut:
• Knife for disk rotating to the left (Standard):
Part no. K6801410
• Knife for disk rotating to the right (Standard):
Part no. K6801420
• Knife for disk rotating to the left ("HD" discs):
Part no. 56451200
• Knife for disk rotating to the right ("HD"
discs): Part no. 56451300
Knife attachment per bolt and nut:
• Bolt: Part no. 56115800
• Nut: Part no. 80201262
To Next Page
Loading...
