Kurzweil K2600 - K2600 with Sampling Option and Digital I;O Option

19-4
Audio Outputs
Using the Optional Digital Outputs
K2600 with Sampling Option and Digital I/O Option
When your K2600 has both the sampling and digital I/O options, you have both eight-channel
direct digital output, and stereo digital output, with two options for the stereo output. These
options are deÞned by an additional parameterÑOutÑthat appears on the SampleMode page
when Input is set to Digital. Set the Out parameter to A/D, and the K2600 routes its analog Mix
output through the sampler before sending it to the stereo digital outs. This converts the signal
to analog and back to digital before it reaches the stereo outs. Set Out to Direct (Dir), and the
K2600 sends the signal from analog out A to the stereo digital outs, without the extra
conversion. The eight-channel KDS output is always direct.