Kurzweil K2700 - Page 153

Program Edit Mode
FM Alt Input Page
3-110
Keymap Pitch Parameters
Adjust
Use the Adjust parameter to adjust the pitch of the Keymap in half steps.
Vel Track
Use the Vel Track parameter to modulate the pitch of each note of the Keymap based on the
MIDI velocity of each note played.
Positive Vel Track values will progressively increase the pitch for higher velocities. For
example, with a positive Vel Track value, playing a velocity of 0 causes no change in pitch,
playing each velocity further above 0 increases the pitch by the Vel Track amount.
Fine
Use the Fine parameter to adjust the pitch of the Keymap in cents.
Fine Hz
Use the Adjust parameter to adjust the pitch of the Keymap in Hertz.
Source 1
Use the Source 1 parameter to modulate the Keymap pitch with a physical controller or
other control source.
Depth
Use the Depth parameter to set the maximum modulation depth of Source 1.
When the Source 1 control source is at its minimum value, Source 1 will have no eect on
the Keymap pitch.
When the Source 1 control source is at its maximum value, Source 1 will apply the amount
of modulation set by the Depth parameter.
Source 1 control source values between the minimum and maximum will scale the amount
of modulation between no eect and the amount set by the Depth parameter.
Source 2
Use the Source 2 parameter to modulate the Keymap pitch with a physical controller or
other control source.