Program Edit Mode
FM Alt Input Page
3-111
DepthCtl
Use the DepthCtl parameter to modulate the Source 2 modulation depth with a physical
controller or other control source.
When a DepthCtl control source is at its minimum value, the Source 2 modulation depth
will be set to the value of the MinDpth parameter.
When a DepthCtl control source is at its maximum value, the Source 2 modulation depth
will be set to the value of the MaxDpth parameter.
DepthCtl control source values between the minimum and maximum will scale the Source 2
modulation depth between the values of the MinDpth and MaxDpth parameters.
MinDpth
Use the MinDpth parameter to set the minimum modulation depth of Source 2.
When a DepthCtl control source is at its minimum value, Source 2 will apply the amount of
modulation set by the MinDpth parameter.
MaxDpth
Use the MaxDpth parameter to set the maximum modulation depth of Source 2.
When a DepthCtl control source is at its maximum value, Source 2 will apply the amount of
modulation set by the MaxDpth parameter.
To Next Page
Loading...
