Kurzweil K2700 - Page 231

Multi Edit Mode
MAIN Page
7-8
Midi Bank
e MIDI Bank parameter determines the MIDI Bank change message that the currently
selected Zone sends when the Multi is loaded. You can set this parameter to a MIDI Bank
change message from 0 to 16383.
When using the K2700 as a MIDI controller, sending a MIDI Bank change message (along
with a MIDI Program change message) when a Multi is loaded ensures that the Program
loaded on the other sound modules in your MIDI chain is the Program that you want.
For example, if you’ve congured a Multi to work in a specic way with Program 32 in
Bank5 of a connected sound module, then set MIDI Bank to 5 and MIDI Program to 32.
is way, whenever you load this Multi, the sound module will automatically load Program
32 in Bank5. Pressing both Previous & Next buttons simultaneously will set this parameter
to the Bank number of the currently selected Local Program.
Note: When you change the Program parameter, the MIDI Bank and MIDI Program
parameters will automatically change to match the Bank and Program numbers of the
Program that you select for Local Program. For example, if you choose Program 178, then
MIDI Bank will change to 1 and MIDI Program will change to 50.
Midi Program
e MIDI Program parameter determines the MIDI Program change message that the
currently selected Zone sends when the Multi is loaded. You can set this parameter to a
MIDI Program change message from 0 to 127.
When using the K2700 as a MIDI controller, sending a MIDI Program change message
(along with a MIDI bank change message) when a Multi is loaded ensures that the Program
loaded on the other sound modules in your MIDI chain is the Program that you want. For
example, if you’ve congured a Multi to work in a specic way with Program 32 in Bank5
of a connected sound module, then set MIDI Bank to 5 and MIDI Program to 32. is
way, whenever you load this Multi, the sound module will automatically load Program 32 in
Bank5.
Note: When you change the Program parameter, the MIDI Bank and MIDI Program
parameters will automatically change to match the Bank and Program numbers of the
Program that you select for Local Program. For example, if you choose Program 178, then
MIDI Bank will change to 1 and MIDI Program will change to 50.
EntryProgChng
e Entry Program Change parameter determines whether or not the currently selected
Zone will send a MIDI Program change message when the Multi is loaded. You can set this
parameter to either O or On. When set to On, the Zone will send a MIDI Program change
message with the Program specied for the MIDI Program parameter.