Kurzweil KME61 - MIDI OUT and MIDI Thru Ports

Chapter 2
SP2 Getting Started
MIDI OUT
The MIDI Out port is for transmitting MIDI data that the SP2 generates. MIDI data does not
containanyaudiosignal. It carries digital “performancedata”suchasthepitch,note velocity,
controlsignals,etc.

<Figure2‐7SP2asaMIDImaster>
Byconnectinga MIDIcablefromtheMIDIOut portoftheSP2 totheMIDIInport ofanother
MIDIdevice,youcanusetheSP2asaMIDImastertoplayandcontrolitsslaves.

MIDI Thru

<Figure2‐8MIDIThrujack>
TheMIDIThruportsendsMIDIdatabeingsenttotheSP2’sMIDIInport.MIDIThruportdoes
nottransmittheMIDIinformationthattheSP2itselfgenerates.










２-5