Kurzweil KME61 - Selecting Setups and Rhythm Patterns

Chapter 3
SP2 Performance Features
Selecting Setups
Setup List
<Chart3‐2>

Press[Program/Setup]buttona fewtimestillits LEDchangesto green.Presscorrespondingly
numberedSoundSelectbuttonstoselectdesiredonefromtheSP2’s16setups.Thedisplaywill
showtheIDnumberoftheselectedsetup(S01~S16)like<Figure3‐5>

<Figure3‐5SelectingSetups>
Rhythm Patterns and Metronome
Selecting Rhythm Patterns
TheSP2has60typesofpre‐recordeddrumpatterns,aswellasametronome.Whenusedwith
these features, the [+/Yes] and [‐/No] buttons below the display function as [Play] and [Stop]
buttons.Toselectadrumpattern,press[Rhythm/Metronome]buttontoenterRhythmSelection
modeanduseSoundSelectbuttonstoselectdesiredpatterns.
<Figure3‐6>
The upper 8buttons inCategory regionareused to select the genre of the drumpatternsand
the lower 8 buttons are used to select 8 variations of each genre. The pattern list is like
following:
３-7