Kurzweil KME61 - Tempo and Metronome Settings

Chapter 3
SP2 Performance Features
Setting the Tempo
♦ Using Knob D
You can change the tempo of the selected rhythm pattern in real time with knob D and the
displaywillindicatesthechangedtempo.Thetempocanbesetfrom40to280bpm.

<Figure3‐9ChangingTempo>
♦ Using [Tap Tempo] Button
Asyoutapakeyfourtimesalongwiththebeatwhilepushingthe[KnobMode]button,theSP2
will determinethetempoautomatically.Duringperformance,tappingthe[Tap Tempo] button
twotimeswilldothesamething.
 While patterns are playing, you can still play the keyboard and change programs
using [Program/Setup] button. If you want to stop patterns playing during performance,
enterRhythmSelectionModeagainbypressing[Rhythm/Metronome]buttonandpress[No]
buttontostopit.
Metronome Feature
To activate Metronome feature, press [Rhythm/Metronome] button and select “world” drum
pattern category.And then, press [0], [+/‐], [Cancel] and [Enter] button in order . The SP2
supports4typesoftimesignatureincluding2/4,3/4,4/4and6/8.Afteryoumakeselection,the
displaywilllooklike<Figure3‐11>.UseKnobDtocontrolthetempoasyoudowiththedrum
patterns.

３-9