Chapter 4
Programming SP2
Display Button
Main Mute n.01 OFF
Layer Mute
L.01 OFF
Split Mute P.53 OFF
<Chart4‐1IndicationofMuteStatus>
YoucanstoreusercreatedsoundsinQuickAccessBank.Seepage3‐10formoreinformation.
Changing Effect Setting
In Program mode, users can change the effects associated with the current program or setup.
TheSP2hastwoseparateeffectblockscalledEffectandReverb.TheeffectsavailableforEffect
block includes choruses, reverbs, distortions, etc. Reverb block is mainly for reverberation
adding dimension to sounds, so the effects for Reverb consist of presets such as Room, Hall,
Chamber, etc. You can change effects for each block with [Effect] and [Reverb] button in
Programmode.Thechartbelowshowstheavailableeffects.
1 2 3 4 5 6 7 8
Effect
Chorus Flange Delay Compress Distotion Filter Lazerverb Misc
Reverb
Booth Room 1 Room 2 Chamber Hall 1 Hall 2 Hall 3 Combi
<Chart4‐2EffectList>
<Figure4‐6>
• Changing Effects
Tochangean effect, press [Effect]button. The LEDin Effectbutton willlight.Userscanselect
typesofeffectswiththeupperpartofSoundSelectbuttonsandselectvariationswiththelower
part of Sound Select buttons. The same method will work for Reverb and you can store your
changesinaQuickAccessbankwiththeassociatedprograms.Youcanusethetwoeffectblocks
atthesametime.
４-4
To Next Page
Loading...
