To Next PageTo Next Page
Need help?Do you have a question about the Kurzweil KME61 and is the answer not in the manual?
General| Model | KME61 |
|---|---|
| Manufacturer | Kurzweil |
| Number of Keys | 61 |
| Key Action | Semi-weighted |
| Velocity Sensitivity | Yes |
| Aftertouch | No |
| Effects | Reverb, Chorus, EQ |
| USB | Yes |
| Polyphony | 64 |
| Multitimbral | 16 |
| Controllers | Modulation Wheel, Pitch Bend |
| Audio Output | 1/4" TRS |
| Display | LCD |
Provides essential safety guidelines for operating the SP2, covering electrical hazards and proper usage.
Details compliance with FCC rules and measures to mitigate radio frequency interference.
Overview of the SP2's sound capabilities, rhythm patterns, setup flexibility, and MIDI controller functions.
Details the SP2's 88-key action, pitch/modulation wheels, knobs, and pedal jacks.
Describes the SP2's multi-effects, reverbs, and available optional devices.
Explains the pedal jacks and lists compatible Kurzweil pedals for control.
Lists included SP2 components and provides guidance on using the manual effectively.
Instructions for attaching the SP2's rubber feet to the bottom of the unit.
Guides on connecting the power supply and audio outputs to a sound system.
Diagrams illustrating connections to powered speakers and audio mixers.
Shows connecting to a home audio system and explains the MIDI IN port function.
Explains the functionality of the MIDI OUT and MIDI Thru ports for data transmission.
Details connecting the SP2 to external sound modules via MIDI for expanded sound capabilities.
Instructions for connecting the SP2 via USB and installing necessary device drivers.
Guides on connecting pedals and the procedure for powering up the SP2.
Instructions on how to access and play the SP2's built-in demonstration songs.
Information on obtaining software upgrades and basic troubleshooting tips.
Introduces the SP2's internal voices (Programs & Setups) and front panel regions.
Explains the Performance/Effect region, knob functions, and Global menu access.
Detailed explanation of Master Volume, Performance/Effect sections, Display, Sound Select, and Edit.
Description of the rear panel connectors, including MIDI, USB, and Pedal ports.
Details audio outputs, headphone jack, power jack, and power switch functions.
Explains the SP2's preset instrumental sounds and drum patterns.
Lists available programs and explains the concept and use of Setups.
Guides on selecting stored Setups and choosing rhythm patterns.
Instructions for setting rhythm tempo and using the metronome feature.
Explains how to store and recall favorite sounds using the Quick Access bank.
How to transpose individual zones or the entire keyboard.
Details the 4 multi-function knobs and how to assign functions to them.
Explains how knobs control Zone Volume, Effect Wet/Dry mix, and Tempo.
Guides on creating new sounds by layering multiple programs or splitting the keyboard.
Step-by-step instructions for layering two sounds on the same keyboard section.
Explains splitting the keyboard into zones and adjusting the split point.
How to modify the effects (Chorus, Flanger, Delay etc.) for programs or setups.
Procedure for altering the reverb type and settings applied to sounds.
How to change the combined effect applied to specific programs.
Explains the process of editing setups and the structure of a setup (zones).
How to define the keyboard range for each sound zone within a setup.
Adjusting keyboard velocity sensitivity for dynamic sound control.
Covers transposing, setting effects for setups, and configuring pedal behavior.
Detailed steps for programming the multi-function knobs with MIDI control changes.
Instructions on how to access the Global mode for instrument-wide settings.
Explains Local Control for MIDI and adjusting keyboard touch sensitivity.
Setting drum map layout and initial values for controllers.
Adjusting tuning and saving system data via MIDI.
A tool for monitoring incoming and outgoing MIDI data.
Procedure for initializing the SP2 to its factory default settings.
Information on obtaining and preparing for SP2 software upgrades via MIDI.
Step-by-step guide for updating the SP2's internal operating system.
Describes Boot Block update, Diagnostics, Engine, and Reset menus.
Explains the SP2's dual effect blocks (Effect, Reverb) and signal routing.
Guides on controlling effect parameters and selecting effect types.
Adjusting the mix of effects and how to temporarily mute them.
Step-by-step guide to creating new sounds by layering programs.
Tutorial on creating sounds by splitting the keyboard into different zones.
Combines layered sounds with rhythm patterns for performance.
Guidance on unit care and troubleshooting power-related problems.
Diagnosing issues related to sound output and volume levels.
Troubleshooting issues with MIDI cables, connections, and computer sequencing.
Troubleshooting pedal issues and locating service centers.
Details physical dimensions, weight, voltage, frequency, and power consumption.
Specifications for audio outputs and a reference for key parameters.
A chart detailing MIDI messages transmitted and recognized by the SP2.
Default assignments for knobs and controllers in MIDI controller mode.
A comprehensive list of available effects and reverb presets.
A reference list of standard and special MIDI controllers.
Explains the Panic function for clearing stuck MIDI notes.
Defines the key assignments for percussion sounds in the Normal drum map.
Defines the key assignments for percussion sounds in the GM drum map.
