Kurzweil KME61 - Quick Access Bank Usage

Chapter 3
SP2 Performance Features
<Figure3‐10>
 Metronome On/Off
Likerhythmpatterns, [Play] buttonwill startthemetronomeand[Stop]buttonwillstop it.
Whilethemetronomeisrunning,youcanstillplaythekeyboardandchangeprogramsusing
[Program/Setup] button. If you want to stop the metronome during performance, enter
Rhythm Selection mode again by pressing [Rhythm/Metronome] button and press [No]
buttontostopit.

Using Quick Access Bank
The SP2 has 16 empty slotsfor storing frequently used sounds, or usercreated programs and
setups. We call them Quick Access bank. You can quickly save sounds to those slots within
QuickAccessbankandlater,selectanyofthestoredprogramsorsetupswithasinglepressofa
button.Thisisaveryconvenientfeature,especiallyforaliveshow.

<Figure3‐11>
Editing Quick Access Bank
IfyouneedinstantaccesstospecificSP2soundsfrequently,that’swhatQuickAccessbankisfor.
Eachofthe16slotscorrespondstothe16buttonsintheSoundSelect/DataEntrysectiononthe
SP2’sfrontpanel.
Makeoneofyourfavoriteprogramsorsetupsthecurrentsoundand press[Store]button.The
sound will be stored in one of the empty slots and the SP2 will enter Quick Access mode.
３-10