Kurzweil KME61 - Performance; Effect Controls

Chapter 3
SP2 Performance Features
Performance / Effect

<Figure3‐1>
XMIDIcontrollermode
‐KnobsA‐DcontrolMIDIcontrolchangedependingonthecurrentprogram.
YZoneVolumemode
‐KnobsA‐Dcontrolvolumelevelofeachlayer.
ZEffectWet/Drymode
‐KnobsA‐Dcontrolthewet/drymixofFXblocks.
[KnobMode/TapTempoButton
‐KnobMode/TapTempobuttonisusedforselectingKnobModeorsettingthetempoofthe
internalmetronome/rhythmpatternsinrealtimebytappingit.

Global
TheGlobalmenuprovidesseveralparametersthat youcancontroltheSP2with.In theGlobal
menu,youcanmakechangesthataffecttheentireSP2,forexample,Localon/off,DrumMap,
DrumChannel,Tuning,SysEXdump,MIDIscope,Reset,andmore.
Effect (Effect, Reverb)
TheSP2providesmorethan50typesofeffectsincludingreverb,delay,chorus,flanger,phaser,
tremolo, panner, distortion, compressor, rotary speaker simulator, sound enhancer, waveform
shaper, and more. There are 30 of preset reverb. For more detailed information, please read
page7‐1
Front Panel


３-2