Kurzweil KME61 - Installing Software Upgrades

Chapter 6
Update
Installing Software Upgrades
1. Afterpoweringon,whenthreedotsonthedisplayareblinking,pressthe[Transpose]
button.

<Figure6‐1>
2. Thedisplaywillshow“uOS”(UpdateOS)message.
3. Ifyouwanttomovetoanothermenu,use[+/Yes]or[‐/No]button.
4. From now on, pressing [Metronome] button means “Yes” and pressing [program]
buttonmeans“No”.

<Figure6‐2>
5. Thus,if youdecidetoinstall softwareupgrades, press [Metronome] button whilethe
displayisshowing“uOS”.
6. Then, the display will show “u.O.S.” that means theSP2 is now waiting for the data
transmission.
7. StartplayingtheMIDIfilecontainingnewsoftwarefromthesequencer,oraMIDIfile
playersuchasWindowsMediaPlayer.
8. If the SP2 is receiving the MIDI data correctly, the display will shows “1‐r” like <
Figure6‐3>.

<Figure6‐3>

６-2