Kurzweil KME61 - Page 65

Chapter 6
Update
9. IfyoustarttheMIDIfileplayerandstillthedisplayshows“u.O.S.”,itmeansthatthe
dataisnotbeingsenttotheSP2properly.
10. Inthiscase,makesuretheMIDIconnectionandtheMIDI fileplayersettingfromthe
computeriscorrectonemoretime.
11. If everything works well, the loading may take up to 18 minutes. After the software
loading is completed, the display will show “OK” message which means that the
softwareupgradehasbeensuccessfullydone.

<Figure6‐4The“OK”message>
12. Turnpoweroffthenon.
13. Now,thesoftwareupgradeiscompletedsuccessfullyandyourSP2willstartwiththe
new operatingsystemand/orfeatures. Please, refertotheReadMe File includedin
thesoftwareupgrades.

















６-3