Chapter 4
Programming SP2
<Figure4‐7ButtonsforEffectSetting>
→Forthisexample,we’regoingto change the Effectassociatedwith Program 1 StereoGrand
Piano.
1. SelectProgram1(n01)StereoGrandPiano.
2. Press[Effect]button.Thedisplaywillshow“E06”andtheLEDin[Edit]buttonintheEdit
regionoftheSP2’sfrontpanelwillblink.Thecapital“E”meansthattheSP2isnowinEffect
Editormodeandthefollowingtwodigitsindicatethetypeandthevariationnumberofthe
effect associated with the currently selected program. For more information about the
effectsandreverbs,refertoAppendixB‐7,EffectsandReverbs.
<Figure4‐8ThedisplayinEffectEditormode>
3. SelectthedesiredtypeofeffectwiththeupperpartofSoundSelectbuttonsintheCategory
region. The buttons are labeled Chorus, Flanger, Delay, Compressor, Distortion, Filter,
LazerVerb, and Misc.( Rotary Speaker, Enhancer, Simple Motion, etc. ) After making
selection,selectthedesiredpresetwithoneofthethelower8buttons.
<Figure4‐9SelectingEffectPresets>
4. Press [Store] in the Edit region. The SP2 will ask if you want to store the changed effect
setting of the current Program.Store the change with [+/Yes] button and the procedure is
completed.Now,theSP2willreturntoProgrammode.
４-5
To Next Page
Loading...
