3
3-13
Basic Operation
The procedure for using two-sided/duplex copying is explained below.
1
Press the
Function Menu
key. Function Menu appears.
2
Press the
or
key to select [Duplex].
3
Press the
OK
key. Duplex appears.
4
Press the
or
key to select the desired duplex
copying mode.
If you select [1-sided>>2-sided], press [Detail] (the
Right
Select
key) and you can select the binding edge of the
finished copies and the original setting orientation.
After pressing the
OK
key, select the binding edge of the
finished copies and the original setting orientation.
If you select [2-sided>>1-sided], press [Detail] (the
Right
Select
key) and you can select the binding edge of the
original and the original setting orientation.
After pressing the
OK
key, select the binding edge of the
original and finished copies, and the original setting
orientation.
To Next Page
Loading...
