3-14
Basic Operation
If you select [2-sided>>2-sided], press [Detail] (the
Right
Select
key) and you can select the binding edge of the
original.
After pressing the
OK
key, select the binding edge of the
finished copies.
After pressing the
OK
key, select the original setting
orientation.
5
Press the
OK
key.
Completed.
is displayed and the
screen returns to the basic screen.
6
Press the
Start
key. Copying begins.
When [1-sided>>2-sided] is selected, press [End Scan]
(the
Right Select
key) when original scanning finishes.
To Next Page
Loading...
