6-17
Using Various Functions > Functions
Duplex
Produces two-sided copies.
The following modes are available.
One-sided to Two-sided
Produces two-sided copies from one-sided originals. In case of an odd 
number of originals, the back side of the last copy will be blank.
The following binding options are available.
A Original Left/Right to Binding Left/Right: Images on the second sides are 
not rotated.
B Original Left/Right to Binding Top: Images on the second sides are rotated 
180 degrees. Copies can be bound on the top edge, facing the same 
orientation when turning the pages.
Two-sided to One-sided
Copies each side of a two-sided original onto two individual sheets. 
The following binding options are available.
•  Binding Left/Right: Images on the second sides are not rotated.
•  Binding Top: Images on the second sides are rotated 180 degrees.
Two-sided to Two-sided
Produces two-sided copies from two-sided originals. 
The paper sizes supported in Two-sided to Two-sided mode are A4, B5, 
A5, Legal, Letter, Executive, Statement, Oficio II, 216 × 340 mm, Folio, 
Envelope C5, and 16K.