Kyocera ECOSYS M3540dn User Manual

8-11
Setup and Registration (System Menu) > System Menu
Secure Protocol
Host Name
LAN Interface
System/Network Network Setting Secure Protocol
Item Description
Secure Protocol SSL Select whether to use SSL for communication.
Value: Off, On
IPP Security Select the IPP security level. This setup is available when SSL is [On].
*1
Value: IPP/IPP over SSL, IPPoverSSL only
*1 The setting will be changed after restarting the device or the network for the machine.
HTTP Security Select the HTTP security level. This setup is available when SSL is [On].
*1
Value: HTTP/HTTPS, HTTPS Only
LDAP Security Select the type of encryption according to the type of security employed by the LDAP
server. This setup is available when SSL is [On].
*1
Value: Off, SSL/TLS, STARTTLS
SMTP Security Select the communication protocol according to the type of security employed by the
SMTP server. This setup is available when SSL is [On].
Value: Off, SSL/TLS, STARTTLS
POP3 Security 1 Select the communication protocol according to the type of security employed by the
POP3 server. This setup is available when POP3 is [On].
Value: Off, SSL/TLS, STARTTLS
POP3 Security 2
POP3 Security 3
System/Network Network Setting Host Name
Item Description
Host Name Check the host name of the machine. Host name can be changed from Command Center RX.
Changing Device Information (page 2-42)
System/Network Network Setting LAN Interface
Item Description
LAN Interface Specify the settings for the LAN interface to be used.
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000Base-T
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.

Kyocera ECOSYS M3540dn Specifications

General

Brand	Kyocera
Model	ECOSYS M3540dn
Category	All in One Printer
Language	English