EasyManuals Logo

Kyocera ECOSYS M3540dn User Manual

Kyocera ECOSYS M3540dn
398 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
2-11
Installing and Setting up the Machine > Default Settings of the Machine
Default Settings of the Machine
Before using this machine, configure such settings as date and time, network configuration, and energy saving functions
as needed.
Setting Date and Time
Follow the steps below to set the local date and time at the place of installation.
When you send an E-mail using the transmission function, the date and time as set here will be printed in the header of
the E-mail message. Set the date, time and time difference from GMT of the region where the machine is used.
1
Display the screen.
1 Press the [System Menu/Counter] key.
2 Press the [ā–²] or [ā–¼] key to select [Common Settings], and press the [OK] key.
3 Press the [ā–²] or [ā–¼] key to select [Date Setting], and press the [OK] key.
NOTE
The default settings of the machine can be changed in System Menu. For settings that are configurable from System
Menu, refer to Setup and Registration (System Menu) (page 8-1)
.
NOTE
• If user login administration is enabled, you can only change the settings by logging in with administrator privileges.
If user login administration is disabled, the user authentication screen appears. Enter a login user name and
password, and press [Login].
The factory default login user name and login password are set as shown below.
• Be sure to set the time difference before setting the date and time.
Login User Name Login Password
4000 4000
Sys. Menu/Count.:
User/Job Account
Exit
04
User Property
05
Common Settings
06
21
Common Settings:
Date Setting
Exit
09
Error Handling
08
Measurement
07
21

Table of Contents

Other manuals for Kyocera ECOSYS M3540dn

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS M3540dn and is the answer not in the manual?

Kyocera ECOSYS M3540dn Specifications

General IconGeneral
Print TechnologyLaser
Print Resolution1200 x 1200 dpi
Duplex PrintingYes
Scan TypeColor CIS
Scan Resolution600 x 600 dpi
Fax CapabilityYes
Fax Transmission Speed33.6 kbps
Paper Capacity500 sheets
ConnectivityUSB, Ethernet
CopyingYes
ScanningYes
Modem Speed33.6 kbps
Standard Input Capacity500 sheets
Standard Output Capacity250 sheets
Maximum Output Capacity250 sheets
Maximum Print SizeA4
Standard InterfacesUSB 2.0, Ethernet
Ethernet LANYes
Internal Memory512 MB
Power Consumption (typical)661 W
DisplayLCD
FunctionsPrint, Copy, Scan, Fax
Operating System CompatibilityWindows, Mac OS, Linux
Print Speed40 ppm (pages per minute)
Copy Speed40 cpm (copies per minute)
Standard Paper Tray Media TypesRecycled
Maximum Internal Memory1, 536 MB
Weight22 kg
Product ColourBlack

Related product manuals