5-23
Operation on the Machine > Sending Document to Folder on an FTP Server (Scan to FTP)
Sending Document to Folder on an FTP Server
(Scan to FTP)
1
[Home] key > [Send]
2
Place the originals.
3
In the destination screen for sending, select [+] > [FTP]
4
Enter the destination information.
The table below lists the items to be set.
• When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
Primary Network (Client) (page 8-55)
• Before sending a document, configure the FTP Client (Transmission) .
Making a note of the computer name and full computer name (page 3-17)
Loading Originals (page 5-2)
Character Entry Method (page 11-10)
Item Descriptions Max. characters
Host Name
*1
*1 To enter the IPv6 address, enclose the address in brackets [ ].
(Example: [2001:db8:a0b:12f0::10])
Host name or IP address of FTP server
Up to 64 characters
Port Port number
If the port number is not specified, the default port number is
21.
―
Folder Path
*2
*2 When the FTP server is based on Linux/UNIX, the path including the sub-folder is combined by the slash "/" not
using the back-slash.
Path for the file to be stored
For example: User\ScanData
If no path is entered, the file is stored in the home directory.
Up to 128 characters
Login User Name FTP server login user name
Up to 64 characters
Login Password FTP server login password
Up to 64 characters
To Next Page
Loading...
Need help?
General