10-40
Troubleshooting > Adjustment/Maintenance
Adjustment/Maintenance
Overview of Adjustment/Maintenance
If there is an image problem and the message to run adjustment or maintenance menu appears, run Adjustment/
Maintenance in the system menu.
The table below lists the item you can carry out.
Drum Refresh
Remove image blur from the printout.
1
Display the screen.
[Home] key > [...] > [System Menu] > [Adjustment/Maintenance]
2
Perform the drum refresh.
"Image Adjustment" > [Drum Refresh] > [Execute]
"Drum Refresh 1" begins.
Item Description Reference Page
Drum Refresh 1 Remove image blur from the printout. page 10-40
Drum Refresh 2 Remove white spots from the printout. page 10-41
Drum Refresh 1 cannot be performed while printing. Execute Drum Refresh after the printing is done.
To Next Page
Loading...
