6-46
Using Various Functions > Functions
Email Encrypted TX
Sends encrypted E-mail using the electronic certificate.
Encryption secures the document transmission.
(Value: [Off] / [On])
Digital Signature Email
Add a digital signature to the email, using the electronic certificate.
By adding a digital signature to an email, you can confirm the identity of the destination and detect tampering
during transmission.
(Value: [Off] / [On])
Configuring S/MIME settings in the Command Center RX
1
Access to the Command Center RX
2
Register the device certificate which is used for S/MIME.
1 From the [Security Settings] menu, click [Certificates].
2 Click [Settings] of [Device Certificate] (1 to 5) to create or import the device certificate.
3 Click [Restart/Reset] and then [Restart Device] to restart the machine.
3
Configure the protocol settings
1 From the [Network Settings] menu, click [Protocol].
2 Set [SMTP (E-mail TX)] and [S/MIME] to [On] in Send Protocols.
3 Click [Submit].
Advanced
Setup
Functions
To use this function, configure the certificate, protocol and email function in the Command Center RX.
Configuring S/MIME settings in the Command Center RX (page 6-46)
Advanced
Setup
Functions
To use this function, configure the certificate, protocol and email function in the Command Center RX.
Configuring S/MIME settings in the Command Center RX (page 6-46)
Accessing Command Center RX (page 2-72)
Command Center RX User Guide
To Next Page
Loading...
Need help?
General