5-56
Operation on the Machine > Using Document Boxes
Sending Documents in Custom Box to E-mail Address of
Logged in User
When user login is enabled, documents in the custom box are sent to the E-mail address of the logged in user.
1
Configure the settings.
Before using this function, the following are necessary.
• The function icon must be displayed in the home screen.
• An E-mail address must be set in user login for the user who logs in.
2
Select the [Home] key.
3
Select [Send to Me(Email)].
Moving Documents in Custom Box
1
Display the screen.
[Home] key > [Custom Box] > Select the box
2
Move the documents.
1 Select the document in the list that you want to move by selecting the checkbox.
The document is marked with a checkmark.
2 [Others] > [Move/Copy] > [Move to Custom Box] > select the destination of move > [Move] > [Move]
The selected document is moved.
Editing the Home Screen (page 2-19)
Adding a User (Local User List) (page 9-6)
When this function is used, functions other than transmission cannot be used.
If a custom box is protected by a password, enter the correct password.
To deselect, select the checkbox again and remove the checkmark.
If the box to which the document is to be moved is protected by a password, enter the correct password.
To Next Page
Loading...
Need help?
General