6-35
Using Various Functions > Functions
Skip Blank Page
When there are blank pages in a scanned document, this function skips the blank pages and prints only pages
that are not blank.
Blank pages can be set as pages that include ruled lines and a small number of characters.
The machine detects blank pages, saving unnecessary printing without the need to check for blank pages in the
document.
Select [On] > [Detect Item to Skip], and select [Blank Pages + Ruled Lines], [Blank Pages Only] or [Blank
Pages + Some Text].
Quiet Mode
Lower print and scan speed for quiet processing.
Select this mode when the running noise is uncomfortable.
It is possible to set the use of Quiet Mode for each function, such as copying and sending.
(Value: [Off] / [On])
2-sided
Select the type and orientation of the binding based on the original.
Advanced
Setup
Advanced
Setup
Functions Functions
The originals with punched holes or originals printed on a colored substrate may not be recognized as blank
pages.
Advanced
Setup
Advanced
Setup
Functions Functions
• The processing speed will be slower than normal when in Quiet Mode.
• This cannot be used when [Prohibit] is set for "Specify for Each Job".
Specify Each Job (page 8-26)
Org./Sending
Data Format
Functions Functions
Item Value Description
1-sided ― "2-sided/Book Original" is not set.
2-sided Binding Left/Right, Top Select the binding orientation of originals.
Original
Orientation
Top Edge on Top,
Top Edge on Left,
Auto
*1
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
Select the orientation of the original document top edge to scan
correct direction. Select [Original Orientation] to choose
orientation of the originals, either [Top Edge on Top] or [Top
Edge on Left].
To Next Page
Loading...
Need help?
General