5-32
Operation on the Machine > Sending Documents to E-mail Address of Logged in User (to myself)
Sending Documents to E-mail Address of Logged
in User (to myself)
When user login is enabled, the document is sent to the E-mail address of the logged in user.
1
Configure the settings.
Before using this function, the following are necessary.
• To use this function, the function icon must be displayed in the home screen.
• An E-mail address must be set in user login for the user who logs in.
2
Select [Home] key.
3
Select [Send to Me (Email)].
Editing the Home Screen (page 2-19)
Adding a User (Local User List) (page 9-6)
When this function is used, functions other than transmission cannot be used.
To Next Page
Loading...
