5-38
Operation on the Machine > Handling Destination
Choosing from the One Touch Key
In the destination screen for sending, select the One Touch Keys where the destination is registered.
*The [No.] key has the same function as [Search (No.)] displayed on the touch panel. Use to directly enter a number
with the numeric keys, such as specifying a transmission address using a one-touch key number, or calling up a
stored program using the program number. For information on one-touch key numbers, refer to the following:
Choosing from the Search (No.)
Access the destination by specifying the 4-digit (0001 to 1000) One Touch Key number.
In the destination screen for sending, select [Search (No.)] to display the numeric entry screen. Select the entry field,
and use the numeric keys to enter the speed dial number.
If the One Touch Keys for the desired destination is hidden on the touch panel, select [ ] or [ ] to display all One
Touch Keys. This procedure assumes that One Touch Keys have already been registered.
For more information on adding One Touch keys, refer to the following:
Adding a Destination on One Touch Key (One Touch Key) (page 3-41)
If you entered the One Touch Key in 1 to 3-digit, select [OK].
To Next Page
Loading...
Need help?
General