6-16
Using Various Functions > Functions
Mixed Size Originals
Scan the documents of different sizes that are set in the document processor all at once.
This function cannot be used if platen is used. Different Width is not displayed in inch models.
Supported Combinations of Originals
Same Width
When the original widths are the same, the combinations of originals that can be placed are as follows.
• A4 and Folio (Legal and Letter)
Example: Folio and A4
Different Width (Available for metric models only)
The supported combinations of originals are as follows.
• Letter-R, A4-R, Folio, Legal
Example: A4-R, Legal
• You can conveniently select in advance the size and type of paper that will be used often and set them as
default.
MP Tray Settings (page 8-14)
• If the specified size of paper is not loaded in the paper source cassette or multipurpose tray, a confirmation
screen appears. When set to [
Auto
] , if the detected size of paper is not loaded, a confirmation screen appears.
Load the required paper in the multipurpose tray and select [
Continue
] to start copying.
Org./Paper
/Finishing
Org./Sending
Data Format
Functions Functions
Item Value Description
Mixed Size Originals Off
Same Width Scans and sends/stores multiple sheets of
the same width using the document
processor.
Different Width Scans and sends/stores multiple sheets of
different width using the document
processor.
To Next Page
Loading...
Need help?
General