8-43
Setup and Registration (System Menu) > System Menu
Item Description
IPv6 Settings
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is
[On].
IPv6
Select whether to use IPv6.
Value: Off, On
Selecting [On] displays IP address in [IP Addr. (Link Local)] after restarting the network.
Manual Setting
Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6).
Value
IP Address (Manual): 128-bits address is expressed in eight groups consisting of four-
digit hexadecimal digits. The groups are separated by colon (:).
Prefix Length: 0 to 128
Default Gateway: 128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
This function is displayed when [IPv6] is set to [On].
To enter "Default Gateway", set [RA (Stateless)] to [Off].
RA (Stateless)
Select whether to use RA (Stateless).
Value: Off, On
This function is displayed when [IPv6] is set to [On].
Selecting [On] displays IP address in [IP Address (Stateless)] after restarting the
network.
DHCP
Select whether to use the DHCP (IPv6) server.
Value: Off, On
This function is displayed when [IPv6] is set to [On].
Selecting [On] displays IP address in [IP Address (Stateful)] after restarting the network.
DNS Server Address
Set the IP address of DNS (Domain Name System) server.
Value: Use DNS Server from DHCP, Use following DNS Server
When [Use following DNS Server] is selected, you can enter static DNS server
information in the Primary and Secondary fields provided.
DNS over TLS
Set whether to connect to a DNS server during communication protected by TLS.
Value: Off, On, Auto
After changing the setting, restart the network or turn the machine OFF and then ON.
To Next Page
Loading...
Need help?
General