2K3/2L3
1-5-6
(3) Detaching and refitting the inner tray
Procedure
1. Release the lock lever and then remove
the job separator tray.
Figure 1-5-7
2. Remove the cassette.
(See page 1-5-10)
3. Open the front cover.(See page 1-5-3)
4. Remove two screws.
5. Release three hooks A.
6. Pull the left lower cover upwards and
then release nine hooks B.
7. Remove the left lower cover.
Figure 1-5-8
Job separator tray
Lock lever
Screw
Hooks B
Screw
Hooks A
Hook B
Hooks B
Left lower cover
To Next Page
Loading...
