2K3/2L3-1
1-5-8
(4) Detaching and refitting the eject rear cover
Procedure
1. Release the hook by using a flat
screwdriver and then remove the tray
left cover.
Figure 1-5-11
2. Release the hook of the left upper cover
at the rear side.
3. Pull the left upper cover upwards and
then release three hooks.
4. Remove the left upper cover.
ATTENTION: At the time of replace the
left upper cover, confirm the position of
the scaner lock lever .
Figure 1-5-12
Tray left cover
Eject rear cover
Flat screwdriver
Hook
Left upper cover
Hooks
Hook
To Next Page
Loading...
