Kyocera FS-6030MFP - Fuser Section; Detaching and Refitting the Fuser Unit

2K3/2L3
1-5-21
1-5-7 Fuser section
(1) Detaching and refitting the fuser unit
Procedure
1. Open the right cover 1.
(See page 1-5-11)
2. Cause two knobs (yellow).
3. Release the lock lever (blue) and then
remove the fuser unit.
4. Check or replace the fuser unit and refit
all the removed parts.
Figure 1-5-34
1 2
Knobs(yellow)
Lock levers(blue)
Fuser unit