Kyocera FS-6030MFP - Maintenance Mode; Executing a Maintenance Item

2K3/2L3-1
1-3-1
1-3 Maintenance Mode
1-3-1 Maintenance mode
The machine is equipped with a maintenance function which can be used to maintain and service the
machine.
(1) Executing a maintenance item
Enter “10871087” using
the numeric keys.
Enter “001” using the cursor
left/right keys or numeric keys
and press the start key.
Enter the maintenance item
number using the cursor left/right keys
or numeric keys.
The selected maintenance item is run.
Press the stop key.
Press the start key.
Start
End
Maintenance mode is entered.
The maintenance item is
selected.
Maintenance mode is exited.
Repeat the same
maintenance item?
Run another maintenance
item?
No
No
Yes
Yes
Press the status/Job cancel key.