Kyocera FS-6030MFP - Others

2K3/2L3
2-2-7
(4) Others
Figure 2-2-4 Others
1. Paper feed clutch (PFCL) ..................... Primary paper feed from cassette.
2. Registration clutch (RCL)...................... Controls the secondary paper feed.
3. Duplex clutch (DUCL) ........................... Controls the drive of the duplex feed roller.
4. MP solenoid (MPSOL) .......................... Controls the MP bottom plate.
5. Feedshift solenoid (FSSOL).................. Operates the feedshift guide.
6. Exposure lamp (EL) .............................. Exposes originals.
7. Cleaning lamp (CL) ............................... Eliminates the residual electrostatic charge on the drum.
8. Waste toner lamp (WTL) ....................... Lights at the brimmer of the toner box.
9. Fuser heater 1 (FH1) ............................ Heats the heat roller.
10. Fuser heater 2 (FH2) ............................ Heats the heat roller.
11. Fuser thermostat (FTS)......................... Prevents overheating of the heat roller.
12. Cassette heater (CH) ............................ Dehumidifies the cassette section.
Machine innerMachine front Machine rear
1
8
2
3
4
5
11
9
10
12
6
7