2K3/2L3
1-5-39
4. Remove the stop ring from the rear side
of conveying unit and then remove the
link F.
5. To similar,remove the stop ring from the
rear side of conveying unit and then
remove the link R.
Figure 1-5-68
6. Rotate the wire cover.
7. Remove the connector.
8. Rotate the fulcrum axis and slide it for-
ward.
9. Pull the right cover 1 backward and
then remove it.
Figure 1-5-69
Conveying unit
Link R
Stop ring
Stop ring
Link F
Fulcrum axis
Connector
Right cover1
Wire cover
To Next Page
Loading...
