Kyocera FS-9530DN - Others; Detaching and Refitting the Ozone Filter 1 and 2

2GZ/2G1-2
1-5-25
1-5-8 Others
(1) Detaching and refitting the ozone filter 1 and 2
Follow the procedure below to replace the ozone filter 1 and 2.
Procedure
1. Remove the ozone filter 1 from the machine
left side.
Figure 1-5-53
2. Remove the screw and remove the filter
upper cover.
3. Open the filter cover and remove the ozone
filter 2.
4. Replace the ozone filter 1 and 2 and install
the filters.
Figure 1-5-54
Ozone filter 1
Filter upper cover
Ozone filter 2
Filter cover