Kyocera FS-9530DN - Laser Scanner Unit; Detaching and Refitting the Laser Scanner Unit

2GZ/2G1
1-5-11
1-5-3 Laser scanner unit
(1) Detaching and refitting the laser scanner unit
Take the following procedure when the laser scanner unit is to be replaced.
Procedure
1. Remove the developing unit and drum unit
(see pages 1-5-14 and 17).
2. Remove the right lower cover (see pages 1-
5-4).
3. Remove four screws and remove the front
right cover.
Figure 1-5-24
4. Remove three screws and remove the top
tray.
Figure 1-5-25
5. Remove five screws and remove the inner
cover.
Figure 1-5-26
Front right cover
Top tray
Inner cover