Kyocera FS-9530DN - Downloading the Firmware from the Memory Card

2GZ/2G1
1-6-3
(2) Downloading the firmware from the memory card
The procedure below provides how to download firmware from a memory card.
Procedure
1. Turn the main switch off.
2. Insert the memory card into the printer's
memory card slot.
Figure 1-6-4
3. Turn the main switch on.
4. Press Menu key on the printer's operation
panel and carry out the memory card for-
matting procedure (1).
5. When formatting is complete, turn the main
switch off.
Figure 1-6-5
6. Remove the formatted memory card from
the memory card slot.
7. Insert the memory card to the PC's slot or to
the adaptor.
8. Copy the firmware file to download to the
root directory of the memory card.
9. Remove the memory card from the PC's slot
or the adaptor.
Figure 1-6-6
Memory
card slot
Memory card
Message display
(1)
Memory Card >
>Format
>Format ?
Processing
Press the right key.
Press the Menu key. Press the cursor up/down keys.
Press the cursor up/down keys.
Press the OK key.
Press the OK key.
Ready
Ready
Operation panel keys
(Format information is
automatically printed.)
To PC
Memory card
Adaptor
(Memory card read/writer)