Kyocera FS-9530DN - Installing the Compactflash Card (Option); Installing the USB Memory (Option)

2GZ/2G1-2
1-2-11
1-2-5 Installing the CompactFlash card (option)
Procedure
1. Turn the main switch off.
Note: Do not insert or remove a CF card
while power in on. If the CF card is removed
while the machine is on, damage could
result in the machine's electronics or the CF
card.
2. Insert the CF card in the slot. Insert it as its
label surface facing toward outside, connec-
tor end first. Push it in all the way.
Figure 1-2-19
1-2-6 Installing the USB memory (option)
Procedure
1. Insert the USB memory in the USB memory
slot.
Figure 1-2-20
CF card
USB memory