Kyocera FS-9530DN - Page 34

2GZ/2G1
1-3-2
>Set Folio Size
[U035] ########
>Check Cover SW>
[U038]&InterLock
>Set of Paper >
[U051] Loop
>Adjust Motor >
[U053] Speed
>Adjust High >
[U101] Voltage
>Clean Charger
[U102] Cycle ##
>Adjust Toner >
[U112] Refresh
>Setting AC Mode
[U114] Mode #
>Adjust Fixing >
[U161] Heater
>Display TEMP >
[U199]
>Turn Fixing >
[U196] Heater ON
>Set Bulk Feeder
[U208] Size ##
>Punch Dest.
[U234] #####
>Adjust Finish.>
[U237]Limit
>Finisher
>[U246] Adjust
>Face-Up Option
[U391] ###
>Print Menu >
[U392]
>Initialize >
[U393]
>Set Paper Feed>
[U394] Top Reg.
>Check MP tray
[U395] Size ###
>Check Cassette>
[U396] Remain
>Set Paper Feed>
[U398] Left Reg.
>Set FRPO >
[U399] Parameter
Continue from the previous
page
Setting folio size
See page 1-3-5.
Checking the printer
cover switch
See page 1-3-6.
Adjusting the amount
of slack in the paper
See page 1-3-6.
Setting the adjustment
of the motor speed
See page 1-3-7.
Setting the other high
voltages
See page 1-3-8.
Setting the cleaning
interval for the main
charger
See page 1-3-9.
Setting toner refresh
operation
See page 1-3-9.
Setting separation
charger mode
See page 1-3-10.
Switching empty toner
status detection
See page 1-3-10.
>Ignore Toner
[U136] Empty ###
>Set Toner Mode
[U144] ######
Setting toner loading
operation
See page 1-3-11.
Setting the fuser con-
trol temperature
See page 1-3-11.
Turning the fuser
heater on
See page 1-3-12.
Checking the fuser
temperature
See page 1-3-12.
Setting the paper size
for the paper feeder
See page 1-3-13.
Setting punch destina-
tion
See page 1-3-13.
Setting finisher stack
quantity
See page 1-3-14.
Setting the finisher
See page 1-3-15.
Setting the face-up
unit
See page 1-3-19.
Outputs of the history
of events of the ser-
vice calls and paper
jam
See page 1-3-20.
Initializing data for
FRPO
See page 1-3-20.
Adjusting the leading
edge margin of image
printing for each paper
cassette
See page 1-3-21.
Checking the size in
MP tray
See page 1-3-21.
Displaying the amount
of paper remaining in
each paper cassette
See page 1-3-22.
Adjusting left margin
of image printing for
each paper cassette
See page 1-3-22.
Setting FRPO
See page 1-3-23.
Continue to the previous page