Maintenance
Description
item No.
2DF
1-4-36
U237 Setting finisher stack quantity
Description
Sets the number of sheets of each stack on the main tray and on the intermediate tray in the optional finisher.
Purpose
To change the setting when a stack malfunction has occurred.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be set. The selected item is displayed in reverse.
Display Description
MAIN TRAY Number of sheets of stack on the main tray
MIDDLE TRAY Number of sheets of stack on the intermediate tray for sort
copying or staple copying
Setting the number of sheets of stack on the main tray
1. Change the setting using the cursor up/down keys.
Setting Description
0 3000-sheet finisher: 3000 sheets, built-in finisher: 500 sheets
1 3000-sheet finisher: 1500 sheets, built-in finisher: 250 sheets
Initial setting: 0
2. Press the start key. The setting is set.
Setting the number of sheets of stack on the intermediate tray for sort copying or staple copying
1. Change the setting using the cursor up/down keys.
Setting Description
0 For sort copying: 30 sheets, for staple copying: 50 sheets
1 For sort copying: 30 sheets, for staple copying: 30 sheets
Initial setting: 0
2. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selectiong a maintenance item No. is displayed.
1-4-35-1
To Next Page
Loading...
