Kyocera KM-2530

2DF
1-1-1
1-1-1 Specifications
Type ............................................... Desktop
Copying system.............................. Indirect electrostatic system
Originals ......................................... Sheets and books
Maximum size: A3/11" × 17"
Original feed system ...................... Fixed
Copy paper..................................... Drawer: Plain paper (64 – 80 g/m
2
)
Bypass table: Plain paper (60 – 160 g/m
2
)
Special paper: Transparencies, tracing paper, colored paper, letterhead and
envelopes (when using the printer function only)
Note: Use the bypass table for special paper.
Copying sizes ................................. Maximum: A3/11" × 17"
Minimum: A6R/5
1
/
2
" × 8
1
/
2
" (When the bypass table is used)
Magnification ratios ........................ Manual mode: 25 – 400%, 1% increments
Auto copy mode: fixed ratios
Metric
1:1 ± 1.0%, 1:4.00/1:2.00/1:1.41/1:1.22/1:1.15/1:0.86/1:0.81/1:0.70/1:0.50/1:0.25
Inch
1:1 ± 1.0%, 1:4.00/1:2.00/1:1.29/1:1.21/1:0.78/1:0.64/1:0.50/1:0.25
Copy speed .................................... At 100% magnification in copy mode:
25 cpm copier
A3/11" × 17": 15 copies/min.
B4/8
1
/
2
" × 14": 18 copies/min.
A4/11" × 8
1
/
2
": 25 copies/min.
A4R/8
1
/
2
" × 11": 20 copies/min.
35 cpm copier
A3/11" × 17": 19 copies/min.
B4/8
1
/
2
" × 14": 23 copies/min.
A4/11" × 8
1
/
2
": 35 copies/min.
A4R/8
1
/
2
" × 11": 25 copies/min.
40 cpm copier
A3/11" × 17": 19 copies/min.
B4/8
1
/
2
" × 14": 23 copies/min.
A4/11" × 8
1
/
2
": 40 copies/min.
A4R/8
1
/
2
" × 11": 25 copies/min.
First copy time ................................ From 3.9 s (A4/11" × 8
1
/
2
")
Warm-up time ................................. 60 s or less (room temperature 20°C/68°F, 65% RH)
In preheat/energy saver mode: 30 s or less (room temperature 20°C/68°F, 65% RH)
[priorty to power save]
In preheat/energy saver mode: 10 s or less (room temperature 20°C/68°F, 65% RH)
[priorty to recovery]
Paper feed system ......................... Automatic feed
Capacity:
Drawers: 500 sheets
Manual feed
Capacity:
Bypass: 200 sheets
Continuous copying........................ 1 - 250 sheets
Photoconductor .............................. a-Si (drum diameter 40 mm)
Charging system ............................ Single positive corona charging (500 µA)
Exposure light source..................... Semiconductor laser
Exposure scanning system ............ Polygon mirror
Developing system ......................... Dry, reverse developing (magnetic brush)
Developer: 1-component, magnetism toner
Developing bias: +1.72 kV AC
Developing shift bias: 160 V
Toner replenishing: automatic from a toner container
Transfer system ............................. Transfer roller (100 µA)
Separation system ......................... Separation electrode (60 or 10 µA depending on the paper)