Kyocera KM-2530

2DF
1-3-10
Press the [Management] key.
Press the [Copy default] key.
Press the [Machine default] key.
Press the [Print form] key.
Press the [Language] key.
Enter the
management code.
Press the * (Default setting) key.
Execute department manage-
ment items (page 1-3-11).
Press the [Close] key.
Press the [Close] key.
Press the [Close] key.
Enter the
management code.
Make copy default settings
(page 1-3-11).
Enter the
management code.
Make machine default settings
(page 1-3-13).
Output the setting list
(page 1-3-14).
Set the language (page 1-3-14).
Start
End
1-3-3 Copier management
In addition to a maintenance function for service, the copier is equipped with a management function which can be operated
by users (mainly by the copier administrator). In this copier management mode, settings such as default settings can be
changed.
(1) Using the copier management mode