1-3-1
2DF
1-3-1 Unpacking and installation
(1) Installation procedure
Unpack.
Remove the tapes and pad.
Install the optional paper feed desk or
large paper deck.
Attach the function seat.
Remove the pins holding light source units 1 and 2.
Install the toner container.
Connect the power cord.
Load paper.
Make test copies.
Print out the user setting list.
Output an own-status report
(maintenance item U000).
Exit maintenance mode.
Start
Install other optional devices.
Install the toner disposal tank.
Carry out initial developer setting
(maintenance item U130).
Install the original cover or the DF.
Completion of the machine installation.
To Next Page
Loading...
