2DF
2-1-2
The bypass table can be hold up to 200 sheets of paper at one time. Paper is fed from the bypass table by the rotation of
the bypass forwarding pulley and bypass paper feed pulley. Also during paper feed, the bypass separation pulley
prevents multiple sheets from being fed at one time by the torque limiter.
Figure 2-1-2 Paper feed from the bypass table
1 Bypass table
2 Bypass lift guide
3 Bypass forwarding pulley
4 Bypass paper feed pulley
5 Bypass separation pulley
6 Bypass feed roller 1
7 Bypass feed pulley
8 Bypass feed roller 2
9 Bypass feed pulley
0 Bypass paper switch (BYPPSW)
! Bypass feed switch (BYPFSW)
@ Bypass paper length switch (BYPPLSW)
# Bypass paper width switch (BYPPWSW)
To Next Page
Loading...
