Kyocera KM-2530

2DF
2-4-17
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Transfer/ Transfer roller unit Replace Every service Replace. 1-6-35
separation
section
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Developing Developing unit Replace Every service Replace. 1-6-34
section
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Main charging/ Drum unit Replace Every service Replace. 1-6-32
drum section
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Fixing section Fixing unit Replace Every service Replace. 1-6-36
Press roller separation Check, replace Every service Check and replace if it is
claw and clean deformed. Clean with alcohol
after feeding 500,000 sheets.
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Eject section Eject roller Clean Every service Clean with alcohol or a dry cloth.
Eject pulley Clean Every service Clean with alcohol or a dry cloth.
Switchback roller Clean Every service Clean with alcohol or a dry cloth.
Switchback pulley Clean Every service Clean with alcohol or a dry cloth.
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Covers Covers Clean Every service Clean with alcohol or a dry cloth.
Maintenance
Section
part/location
Method Maintenance cycle Points and cautions Page
Other Image quality Check and adjust Every service